Varian turbo v70 controller manual

The controller is designed to be installed into a rack. All the connections are fitted to J2, J3, J4 and J5. Should the controller be connected to a host computer. In the follow ing paragraphs are detailed the. The PCB installed into the customer sy stem must be.

The signals of J2 connector are the follow ing:. Vdc 20 to 32 Vdc pin. The relay switches when. The threshold overriding is indicated also. The signals of J3 connector are the follow ing:. The signals of J4 connector are the follow ing:.

W hen a fault condition is detected,. When the Low. Speed mode is activated a signal is present on this. A voltage from 0 to 10 Vdc. NOTE Infomation to aid the operatr in obtaining the best performance from the equipment. Page 6: General The controller can be operated via remote signals General through an RS connection.

Pin 3 Failure. When a fault condition is detected, the pump is stopped and a signal is present on this All the connections are fitted to J2, J3, J4 and J5 pin. Page 13 NOTE: If a product is received at Varian which is contaminated with a toxic or hazardous material that was not disclosed, the customer will be held responsible for all costs incurred to ensure the safe handling of the product, and is liable for any harm or injury to Varian employees as well as to any third party occurring as a result of exposure to toxic or hazardous materials present in the product.

Japan Avenida Dr. This manual is also suitable for: Print page 1 Print document 15 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR.